Service And Maintenance; Maintenance And Service; Test Interval For Safety-Related Applications - Siemens SIRIUS 3RM1 Manual

Load feeders and motor starters
Table of Contents

Advertisement

Service and maintenance

8.1

Maintenance and service

The 3RM1 motor starters and accessories are maintenance-free.
The motor starter indicates a detected malfunction with LEDs and the fault output.
Note
If a malfunction is repeatedly indicated, the 3RM1 motor starter is defective and must be
replaced.
You will find information about the status indicators of the 3RM1 motor starter in the chapter
Alarms, faults and system events (Page 131).
8.2

Test interval for safety-related applications

Loss of the safety function
In continuous operation, the key safety values apply in the case of a function test interval
(state change of the outputs) ≤ 1 year.
Annual function test
• Actuate the connected sensors.
• Check their effect on the safety relay and the downstream actuators.
• Activate the safety relay via the connected sensors.
• Check their effect on the safety relay and the downstream actuators.
• Defective devices must be replaced.
SIRIUS 3RM1 motor starter
Manual, 06/2016, A5E0345285095020A/RS-AE/005
WARNING
8
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sirius 3rm10Sirius 3rm11Sirius 3rm12Sirius 3rm13

Table of Contents