Table of Contents
Advertisement
Mounting
5.13 Mounting the devices with device connectors on a wall
Step
3
Hold the device connector against the level
surface prepared for screw fastening.
4
Insert the screws through the holes in the device
connectors.
5
Screw the device connector securely onto the
level surface.
Tightening torques:
Top: < 0.1 Nm
•
Bottom: 1 Nm
•
6
Mount the device on the device connector.
7
Mount all the devices required for the system
configuration in accordance with the respective
installation guidelines on the device connectors.
106
Operating instruction
Figure
SIRIUS 3RM1 motor starter
Manual, 06/2016, A5E0345285095020A/RS-AE/005
Advertisement
Table of Contents
