Switch Off Pace Measurement - Beurer as 50 Instructions For Use Manual

Switch off pace measurement

The activity sensor is not able to record any exact activity data for
specific means of transport, such as e.g. driving a car or cycling.
Therefore switch it off for these types of movement so as not to affect
your actual activity times.
If you also calculate your fitness values (cycling, swimming
etc.) with an EasyFit-compatible Beurer HR Monitor, you can
evaluate the measured data of both devices together via the
software. You thus get an overview of all your activity
EasyFit
and fitness values.
It is possible to switch off the pace measurement
of the activity sensor:
You are in the activity menu. The activity time is
displayed in the middle line and your number of
paces in the bottom line. Press the
button for approx. 5 sec. to switch off the pace
measurement. Pressing the button again for
approx. 5 sec. reactivates the pace measure-
ment ( ).
Do not look at the display
while you are running to
avoid accidents by stum-
bling.
If the paces counted agree with
the pace display on the device,
then this intensity level is appro-
priate. If not, you should proceed
with the other intensity levels in
the same way.
23
G
B