Getting Started - Beurer as 50 Instructions For Use Manual

G
ETTING STARTED
Insert battery/Change battery
If you do not want to insert or change the battery yourself,
please bring it to a watchmaker.
The battery compartment of the activity sensor is located on the back
of the monitor. Place the monitor with the front facing downwards on
a soft surface and insert the battery as follows:
1 Using a coin, turn the lid of the battery
compartment anticlockwise until the lid
comes off.
Remove the battery from the battery com-
partment with the aid of a pointed, non-
metallic tool, e.g. toothpick.
2 Put the battery into the battery compart-
ment in such a way that the battery is on
top of the spring underneath the clip (1) and
the positive pole (+) faces upwards. Lock
the battery into place.
Check the seal. The seal has to lie flat in
the casing and there must be no visible
damage to it. The impermeability cannot be
guaranteed otherwise.
10