Power Saving Mode; Key Lock - Beurer as 50 Instructions For Use Manual

To continue getting exact results, the battery has to be
replaced as soon as possible after this symbol has been
displayed.
An explanation of the display abbreviations can be found in the list of
abbreviates at the end of the operating instructions.

Power saving mode

In time display press the
approx. 5 sec. to switch on the power saving
mode. The display of the activity sensor is
switched off in this mode to increase the battery
life. Only the display is switched off, the functions
(e.g. pace counting) are still working. Press any
button for approx. 5 sec. to reactivate the display.

Key lock

If the activity sensor is not operated for approx. 3
minutes, then it will automatically activate the key
lock. Only the buttons are switched off, the func-
tions (e.g. pace counting) are still activated
though. Press the
seconds to reactivate the buttons.
Press the
to activate the key lock manually. Press the
button again for approx. 5 seconds to
deactivate the key lock.
button for approx. 5
button for approx. 5 seconds
16
button for