Figure 8: Connecting the Balanced Stereo Audio Output to an Unbalanced Acceptor Figure 9: Connecting the WP-210AE Tables Table 1: WP-210AE Front Panel Features Table 2: WP-210AE Top Side Panel Table 3: WP-210AE Lower Side Panel Table 4: Technical Specifications of the WP-210AE XGA/Audio Line Driver...
Page 3
WP-220E, and WP-230. This addendum clarifies the correct color of the V sync and H sync coax cables. The color of the coax cables with all Kramer Wall Plates, including the WP-210, WP-210E, WP-210A, WP-210AE, WP-210AL, WP-220, WP-220E, WP-230 will be as follows: For V sync (vertical sync) –...
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Each wall plate is supplied with the required M3x4 screws 3 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
(often associated with low quality cables) Avoiding interference from neighboring electrical appliances and positioning your WP-210AE away from moisture, excessive sunlight and dust Your WP-210AE XGA/Audio Line Driver This section defines the WP-210AE XGA/Audio Line Driver: Available in 3 versions (see section 4.1)
Your WP-210AE XGA/Audio Line Driver 4.1 Your WP-210AE: Available in 3 Versions The Kramer WP-210AE XGA/Audio Line Driver is available in 3 versions— one for Belgium, one for Germany, and one for the England (and the rest of Europe)—as Figure 1 illustrates:...
Your WP-210AE XGA/Audio Line Driver 4.2 Your WP-210AE Front Panel Figure 2 and Table 1 define the front panel of the WP-210AE: Figure 2: WP-210AE Front Panel Table 1: WP-210AE Front Panel Features Feature Function Holes (2) For fastening the wall plate in place...
Your WP-210AE XGA/Audio Line Driver 4.3 Your WP-210AE Top Side Panel Figure 3 and Table 2 define the top side panel of the WP-210AE: Table 2: WP-210AE Top Side Panel Feature Function Bal. Audio Out Connects to the Terminal Block...
Install your WP-210AE XGA/Audio Line Driver, see section 5.1 Operate your WP-210AE XGA/Audio Line Driver, see section 5.2 1 The WP-210AE could be used for component HDTV by connecting YPbPr in place of GBR, and not connecting H and V KRAMER: SIMPLE CREATIVE TECHNOLOGY...
1 Connect the wire labeled “+” to the +12V pin, and the wire labeled “–” to the GND pin 2 Not supplied. The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com 3 Push in the TERM switch if the loop output is used, otherwise make sure that the TERM switch is released...
Technical Specifications Technical Specifications Table 4 includes the technical specifications: Table 4: Technical Specifications of the WP-210AE XGA/Audio Line Driver INPUTS: VIDEO: Looping analog red, green, blue AUDIO: Unbalanced stereo 3.5mm mini jack signals: 0.7 Vpp/75 , H and V sync,...
Page 13
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 14
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the WP-210AE and is the answer not in the manual?
Questions and answers