Hour And Minute Buttons; Keep Warm Button; Off Button; Setting The Clock - Ronco CHEF N GO Instructional Manual

G
ETTING TO
HOUR and MINUTE
buttons

KEEP WARM button

The light on the
"Keep Warm"
button glows
when in
"Keep Warm"
function.

OFF button

Setting the Clock

Press the HOUR and
MINUTE buttons to
adjust the time.
Note:
The cooker's clock
can be set any time
after plugging it
into a power supply.
K
NOW YOUR
The HOUR (HRS) and MINUTE (MIN) buttons are used
to adjust the CHEF N GO's clock as well as the PRE-SET
and COOKING TIMER settings.
(To set or adjust the clock see instructions below).
The "Keep Warm" button will automatically activate the "Keep
Warm" function. When cooking in all modes (except the
Brown mode) the CHEF N GO will automatically go into the
"Keep Warm" function when the cooking cycle is finished.
EEP EP EP
ARM A M AR A RM M
The light will glow on the button indicating the Keep
Warm function is operating. ("Keep Warm" will operate
for up to 24 Hours). When you wish to turn off the "Keep
Warm" function simply press the "Off" button.
Press this button to turn off the CHEF N GO. Also use
this button if you want to change a function once
cooking has started. The "Off" button will not turn
the machine off completely. To do so you must unplug
the cord from the unit and the wall socket.
Setting the CHEF N GO internal clock is very easy.
When you first plug it into a wall socket the numbers on
the screen will flash indicating that you must set the
time, this is simply done by pressing the "Hours" button
to adjust the hours, and the "Minute" button to adjust the
minutes, nothing else is required.
After 10 seconds, The CHEF N GO will sense that you
are not pressing the buttons, and the numbers will stop
flashing. Your clock is set and the CHEF N GO is ready
to cook you a wonderful meal. (If the screen continues
to flash, the time was not set, simply repeat the above
procedure).
To re-set the clock, simply press the "Hours" button
or the "Minute" button, you will hear a beep, and then
you may adjust the time by pressing the HRS and the
MIN buttons as needed.
The CHEF N GO has a built in battery and is provided
so that the Clock will operate when the unit is not
plugged into a wall socket.
CHEF N GO: T
6
C
HE ONTROL
P
ANEL