Waeco CombiPower 2012 Operating Manual page 8

General safety instructions
CAUTION!
!
Disconnect the device from the mains:
– Before working on the device
– Before cleaning and maintenance
– After use
NOTICE!
A
Check that the voltage specification on the type plate is the
same as that of the power supply.
Ensure that other objects cannot cause a short circuit at the
contacts of the device.
Ensure that the red and black terminals never come into
contact.
Do not pull on the cables.
Never pull the plug out of the socket by the cable.
2.2 Operating the device safely
WARNING!
!
Before starting the consumer devices, make sure that the power
supply line and the plug are dry.
CAUTION!
!
Even after the fuse triggers, parts of the inverter remain live.
Do not disconnect any cables when the device is still in use.
NOTICE!
A
Never expose the device to moisture.
Make sure that none of the air inlets and outlets are blocked. If
necessary, clean the vents before you use the device.
Ensure good ventilation.
Do not connect the 230 V output of the inverter to a different
230 V source.
38
CombiPower
EN