Technical Description - Waeco CombiPower 2012 Operating Manual

CombiPower
4

Technical description

4.1 General description
The sine wave inverter with integrated automatic charger is a combination of
two devices:
Battery charger
Sine wave inverter
The device can be used as follows:
As an automatic charger (6-stage charging characteristic)
As a sine wave inverter: the device produces a pure 230 V output voltage
Power sharing: the device powers a connected load with 230 V and simul-
taneously charges a battery
Generator function (mains voltage function): the device supports a 230 V
mains voltage by supplementing it with energy from a battery (common
power source)
Power support (PSF): the device supports a 230 V mains voltage with
energy from a battery by powering some of the loads from the battery and
the others from the 230 V mains supply (separate power sources)
Uninterruptible power supply (UPS): the device powers connected loads
from a battery when the mains supply fails
The device has the following protective systems:
DC low voltage shutdown
DC overvoltage shutdown
Overheating protection
Overload protection
The device is operated using a remote control.
EN
Technical description
41