Introduction; Proper Use; Features And Equipment - Parkside PDS 200A Operation And Safety Notes

Introduction

The following pictogrammes / symbols are used in these operating instructions:
Read the operating instructions!
Always heed warning labels and
safety instructions!
Caution - Danger of electric shock! Hazardous
voltage – danger to life!
Explosive material!
Risk of fire!
V ~
Volt (AC)
Double grinding machine PDS 200 A
For grinding and sharpening metal tools
Introduction
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. To help you do this please read
the accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.

Proper use

The double grinding machine is intended for grind-
ing and sharpening metal tools such as drills, chis-
els etc. and metal items. The device is not intended
for commercial use. Any other use or modification
to the device shall be considered as improper use
6 GB/IE/CY
W
Watts (effective power)
Wear hearing protection, dust protection mask,
protective glasses and protective gloves.
Keep children and other unauthorised personnel
at a safe distance when using electrical tools.
Keep the device away from rain or moisture. Wa-
ter entering an electrical device increases the risk
of electric shock.
Damaged appliances, power cables and power
plugs mean potentially fatal risks from electric
shock. Regularly check the condition of the appli-
ance, the power cables and the power plugs.
Dispose packaging and appliance in an
environmentally-friendly way!
and could give rise to considerable dangers.
The manufacturer will not accept liability for loss or
damage arising from improper use.

Features and equipment

Magnifying glass
1
Eye guard mount
2
Eye guard
3
Grinding wheel
4
Workpiece/tool rest
5
Adjuster screw for workpiece/tool rest
6
Wheel guard cover
7
Mounting holes
8
ON/OFF switch
9
Machine-side flange
10
Left-hand thread
11
Outside flange
12
Nut
13
Fastening screw
14