Fire Or Explosion Hazard - Honeywell SLATE Installation Instructions Manual

IMPORTANT
1. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with these instructions, may cause interference for radio
communications. It has been tested and found to comply
with the limits of a Class A computing device of part 15
of FCC rules, which are designed to provide reasonable
protection against such interference when operated in a
commercial environment. Operation of this equipment in a
residential area may cause interference; in which case, the
user, at their own expense, may be required to take whatever
measures are required to correct this interference.
2. This digital apparatus does not exceed the Class A limits for
radio noise, set out in the Radio Interference Regulations of
the Canadian Department of Communications.
3. Cable shield must be terminated to ground at both ends. If
shielded cable is NOT used, use three-wire twisted cable.
WARNING

Fire or Explosion Hazard

Can cause severe injury, death, or property damage.
Disconnect the power supply from the main disconnect
before beginning installation to prevent electrical shock
and equipment damage. More than one disconnect can
be required.
SLATE FUEL AIR RATIO MODULE
™
R8001C6001
9