Wiring; Installing The Fuel Air Ratio Module On The Sub-Base Module - Honeywell SLATE Installation Instructions Manual

Wiring

WARNING
Electrical Shock Hazard.
Can cause severe injury, death or equipment damage.
1. Disconnect the power supply before beginning installation to
prevent electrical shock and equipment damage. More than
one power supply disconnect can be involved.
Fig. 2.

Installing the Fuel Air Ratio Module on the Sub-Base Module.

2. Wiring must comply with all applicable codes, ordinances and
regulations.
3. Wiring must comply with NEC Class 1 (Line Voltage) wiring.
8
M35383
32-00006—03