Help And Troubleshooting - BT Video Baby Monitor 630 User Manual

Help and troubleshooting

If you have any problems setting up or using
your baby monitor, see if these common
questions can help.
How do I attach my Baby unit to a wall?
You'll need some screws and wall plugs – they don't come
with your baby monitor. The screw heads will need to fit the
keyholes on the base to support the Baby unit.
Here's what to do.
Make sure the wall can support the Baby unit.
1
Make sure the power plug can reach the power socket and
2
it is out of your baby's reach.
Check the reception strength and the camera angle of the
3
Baby unit.
Check that you aren't drilling into any hidden wiring or
4
plumbing. BT isn't responsible for any damage or injury
caused while trying to wall mount your Baby unit.
Use a pencil to mark two parallel holes where you want
5
your Baby unit on the wall. Make sure the holes are the
same distance apart as the keyholes in the bottom of the
Baby unit.
24
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Drill two holes where you've made the markings.
6
Insert wall plugs, if required.
Insert the screws into the holes and tighten until only
7
/
approximately inch of the screw is visible.
1
4
Line up the keyholes on the base of the Baby unit with the
8
screws in the wall. Slide the Baby unit down until it locks
into place.
Keyhole