Help And Troubleshooting - BT 7000 User Manual

Help and troubleshooting

If you have any problems setting up or using
your baby monitor, see if these common
questions can help.
How long does the Parent unit battery last?
A fully charged Parent unit will last about 6.5 hours with
normal use. To speed up charging, charge the Parent unit
when it's switched off. You can also charge the Parent unit and
use it at the same time, but it'll charge slower and take longer
to fully charge.
How do I replace the battery?
You should only use a Lithium 3.7V 2500mAh 9.25Wh
battery from our helpdesk. Call us on 0808 100 6554* when
you need to replace it. When you get it, take off the battery
compartment cover and pull the tab inside to get the old
battery out. Then insert your new battery and put the cover
back on.
Need some help? Call 0808 100 6554* or go to bt.com/producthelp
How do I attach my Baby unit to a wall?
You get some screws and plugs with your baby monitor.
Here's what to do.
1. Make sure the wall can support the Baby unit.
2. Make sure the power plug can reach the power socket.
3. Check that you aren't drilling into any hidden wiring or
plumbing. BT isn't responsible for any damage or injury
caused while trying to wall mount your Baby unit.
4. Use a pencil to mark where you want your Baby unit.
5. Check the reception strength of the Baby unit and
its camera angle before drilling two 5mm holes,
37mm apart.
BT Video Baby Monitor 7000
Item code: 078689
www.bt.com
Serial no:
Made in China
5mm drill bit
33