Table of Contents
Advertisement
Place the Baby unit near a power socket in the room where you're going to be
3
monitoring your baby most of the time. It should also be at least one metre away
from your baby.
Plug the cable into the Baby unit, then plug it into
4
the mains power socket and switch the socket on.
If you like, you can attach your Baby monitor to a wall. (Remember to check the
5
reception and position before you do that – you won't be able to adjust it afterwards.)
Find out more about how to do that on page 24.
Need some help? Call 0800 218 2182* or go to bt.com/producthelp
Getting set up
Tip
Keep the power cord out of
baby's reach by looping any
extra length and securing it.
5
Advertisement
Table of Contents
