Midea MTA-76C(H)RN1 Technical Manual page 71

MCAC-UTSM-201501
the installation screws to adjust the horizontality. Finally, Tighten the screws.
2.2 Designing and connecting the duct

The duct accessories and materials must be produced by professional manufacturers.

Int order to prevent air flow shoting, do not set the air inlet orifice near the air outlet orifice.

Install a filter at an easy-to-maintain place such as intake pipe. If without the filter, the duct
will gether on the air heat exchanger and lead to fault and water leak of the air conditioner.

In order to suppress noise effectively, install noise suppression and sound insulation
devices, especially in the noise-sensitive spaces such as meeting rooms.

For connection of the flange plane, use non-flammable canvas adapter to prevent
transmission of vibration. Use M6×20 screws (configured on site) for connection.
MTA-76C(H)RN1, MTA-96C(H)RN1, MHB-76C(H)RN1, MHB-96C(H)RN1:
View of air outlet side (Unit: mm)
Midea R410A T3 Top-discharge Split Type Series 50Hz
70