Midea MTA-76C(H)RN1 Technical Manual page 103

R410a t3 top-discharge split type series 50hz
Table of Contents

Advertisement

MCAC-UTSM-201501
Squeak may occur when the air conditioner starts or stops running. That is the sound
raised because the plastic assemblies inflate or deflate when the temperature changes.
 Dust is blown out of the indoor unit.
When the air conditioner resumes service after a long period out of service, the dust in the
indoor unit will be blown out.
 The indoor unit gives out smell.
The indoor unit absorbs the smell of the room, furniture or smoking, and gives it out when
running.
 Shift from cooling mode to air supply mode.
In order to prevent frosting of the indoor heat exchanger, the air conditioner shifts to air
supply mode automatically, and resumes to cooling mode in a short time.
When the room temperature decreases to the set temperature, the air conditioner will
shut down the compressor automatically, and shifts to the air supply status. After the
room temperature rises, the compressor will restart. The action of the compressor in
the heating mode is the contrary.
11.2 Faults of air conditioner and cause
If any of the following exceptions occur, operation of the air conditioner will be immediately
stopped. Turn off the power switch, and check it.
The Run indicator blinks quickly (2 blinks per second.). After turning off the power
switch and then turning it on again, that indicator still blinks quickly. The receiving
function of the remote controller fails, or the start and shutdown operation is abnormal.
The fuse blows out frequently, or the circuit breaker protection occurs frequently.
Foreign substance or moist enters the air conditioner or other exceptions occur.
If the air conditioner fails but does not meet the foregoing phenomena obviously, check the
system in the following procedure:
Midea R410A T3 Top-discharge Split Type Series 50Hz
102

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents