Midea MTA-76C(H)RN1 Technical Manual page 101

MCAC-UTSM-201501
the light extinction, while the status of selected mode icon is light-on instead of flashing.
Power on for the first drive up, after press the ON/OFF, default mode of
malfunction occur, FAN icon would always light-on, and
codes is show. Modes only could be shifted at unit on.

This is speed icon. Different speeds correspond to the waves below of globe icon. The first
wave means low speed wind; the middle wave means medium speed wind; the last one
stand for high speed wind.

SWIND
Swing icon. Press the key of SWING, which icon is light-up, while close off this mode, the
icon will light-off.

For temperature display, the
and error display, the first
codes form ' ' to ' '.
In only air supply mode, no setting temperature is showed at

While locking, the lock icon is light-on; while unlocking, the lock icon is light-off.

Time on and Time off
The time setting only could be set by remote controller. If set time-on mode, which Time on
icon is light-on; if set time-off mode, Time off icon is light-off.

Fault
When the unit is in error state, the icon will be showed.
Lock
Midea R410A T3 Top-discharge Split Type Series 50Hz
shows temperature value, the unit is ° C. For protection
display (for protection) or
FAN appear. If
FAULT icon light up, fault
(for error), the last
.
display
100