Using The Telephone - Vehicles Without: Navigation System - Ford MONDEO Owner's Manual

On vehicles with an accept and reject
button, phone calls can be accepted and
rejected by pressing the appropriate
button.
Note: Some audio units have the accept
and reject buttons on the front bezel. These
operate in the same way.
USING THE TELEPHONE -
VEHICLES WITHOUT:
NAVIGATION SYSTEM
This chapter describes the phone functions
of the audio unit.
Note: Refer to your audio guide for details
of the controls.
An active phone must be present.
Even if connected to the audio unit, your
phone can still be used in the usual way.
Note: You can exit the phone menu by
pressing any source button CD, AM/FM or
AUX.
Making a call
Dialing a number using voice control
Phone numbers can be dialed using voice
control. See Telephone commands
(page 291).
Dialing a number using the address
book
You can access your phone address book
via Bluetooth. The entries will appear in
the unit display.
1. Press the PHONE or the call accept
button.
2. Press the MENU button.
3. Keep pressing the MENU button until
PHONEBOOK appears.
4. Press the seek buttons to select the
desired phone number.
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013
Telephone
Note: Press and hold the seek button to
skip to the next letter in the alphabet.
5. Press the PHONE or the call accept
button to dial the selected phone
number.
Dialing a number using the address
book - Sony radio
You can access your phone address book
via Bluetooth. The entries will appear in
the unit display.
1. Press the PHONE button.
2. Press the seek button until the phone
book is shown.
3. Press the up/down arrow buttons to
select the desired phone number.
Note: Press and hold the up/down arrow
buttons to skip to the next letter in the
alphabet.
4. Press the PHONE or the call accept
button to dial the selected phone
number.
Dialing a number using the telephone
keypad
If you have an audio unit with a telephone
keypad (buttons 0-9, * and #):
1. Press the call accept button. Press the
PHONE button if you have a Sony
radio.
2. Dial the number using the telephone
keypad on the audio unit.
3. Press the call accept button.
Note: If you enter an incorrect digit whilst
entering a phone number, press the seek left
button to erase the last digit. A long press
will erase the complete string of digits.
Press and hold 0 to enter a + digit.
Ending a call
Calls can be ended by pressing the call
reject button.
276