Information Messages - Ford MONDEO Owner's Manual

Type 3
1. Highlight Settings with the up and
down arrow buttons and press the right
arrow button.
2. Highlight Setup with the up and down
arrow buttons and press the right arrow
button.
3. Highlight Display and press the right
arrow button.
4. Highlight Measure Unit and press the
right arrow button.
5. Highlight the desired setting and press
the OK button to confirm the setting.

INFORMATION MESSAGES

Press OK to acknowledge and remove
some messages from the information
display. Other messages will be removed
automatically after a short time.
With instrument cluster type 3, certain
messages need to be confirmed before
you can access the menus.
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013
Information Displays
88
Message indicator
The message indicator
illuminates to supplement some
messages. It will be red or amber
depending on the severity of the message
and will remain on until the cause of the
message has been rectified.
Message symbols
See Owner s Manual.
Have the system checked at the
next service.
Have the system checked as
soon as possible.
Stop your vehicle as soon as it is
safe to do so.
Viewing current messages
Type 1 and 2
1. Press the right arrow button on the
steering wheel to enter the main menu.
2. Highlight Information with the up and
down arrow buttons and press the right
arrow button.
3. Highlight Messages and press the right
arrow button.
4. Use the up and down buttons to view
the current messages.
Type 3
1. Press the right arrow button on the
steering wheel to enter the main menu.
2. Highlight Settings with the up and
down arrow buttons and press the right
arrow button.