Ford MONDEO Owner's Manual page 200

1. Install the locking lug nut key.
2. Slacken the lug nuts.
3. Jack up the vehicle until the tire is clear
of the ground.
4. Remove the lug nuts and the wheel.
Installing a road wheel
WARNINGS
Use only approved wheel and tire
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical Specifications (page 199).
Do not fit run flat tires on vehicles
that were not originally fitted with
them. Please contact your dealer for
more details regarding compatibility.
CAUTION
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013
Wheels and Tires
Note: The lug nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the lug
nuts are against the wheel.
1.
2. Install the lug nuts finger tight.
3. Install the locking lug nut key.
4. Partially tighten the lug nuts in the
5. Lower the vehicle and remove the jack.
6. Fully tighten the lug nuts in the
7.
198
Install the wheel.
sequence shown.
sequence shown. See Technical
Specifications (page 199).
Install the hub cap or cover using the
ball of your hand.
WARNING
Have the lug nuts checked for
tightness and the tire pressure
checked as soon as possible.