Parameter Setting For Video Recording - AEE magicam s50 User Manual

aee.com
change of gravity. The system will automatically start video recording
in case of shock or tilting, etc. Especially when this mode is applied
in fixed installation, for example, mounted on the vehicle or helmet,
it can start video recording timely without the need to start the
recording in advance. It can free you from manual operation while
conserving battery power.
When the camera does not sense any gravity change for 3 minutes,
it will exit video recording.

Parameter setting for video recording

To set the parameters for video recording ,perform the following
operations:
1. Press "M" button to enter the setting menu;
2. Press "<" / ">" button to select " ";
3. Press "+" / "-" button to move blue cursor to the sub-menu you
want to configure;
4. Press "OK" button to enter the sub-menu;
5. Press "+" / "-" button to select the parameters you want;
6. Press "OK" button to confirm;
7. Press "M" button again to exit the setting menu.
17