Parameter Settings - AEE MagiCam SD21 User Manual

− Press "+" or "–" to adjust the date or time.
− Press "OK" after adjusting the date or time.
− Press the "M" key to exit the interface.

Parameter Settings

To set parameters, perform the following operations:
− In the preview mode under power-on state, press the " M " key to display the menu interface.
− Press the "<" or ">" key to choose a left or right option from the menu interface.
− Press the "+" or "–" key to choose an upper or lower option from the menu interface.
− After selecting an option, press OK to save settings.
− Press the M key again to save the setting and exit the interface.
Note: After power-on, the video camera adopts all the preset settings, except for audio recording mode. You can change
settings as you desire.
① Set video camera parameters.
a. Exe.: Select " "(the default mode) for video recording and "
b. Resolution for video recording: Select the desired resolution for video recording. You can set this parameter to the
1080P, 1080i, 960P, 720P, or WVGA resolution.
For the
PAL system
For the
NTSC system
" for audio only.
-9-
aee.com