Parameter Settings - AEE MagiCam sd23 User Manual

+" or "–" to adjust the date or time.
OK" after adjusting the date or time.
M" key to exit the interface.

Parameter Settings

To set parameters, perform the following operations:
<" or ">" key to choose a left or right option from the menu interface.
+" or "–" key to choose an upper or lower option from the menu interface.
Note: After power-on, the video camera adopts all the preset settings, except for audio recording mode. You can change
settings as you desire.
① Set video camera parameters.
a. Exe.: Select " "(the default mode) for video recording and "
b. Resolution for video recording: Select the desired resolution for video recording. You can set this parameter to the
For the
PAL system
For the
NTSL system
M " key to display the menu interface.
" for audio only.
-9-
aee.com