Download Print this page

Mounting Instructions - CDVI DGLPWLC Installation Manual

Indoor/outdoor proximity card readers
Hide thumbs Also See for DGLPWLC:

Advertisement

Available languages

Available languages

INSTALLATION MANUAL
DGLPWLC - DGLPFNWLC - DGLIWLC - DGLIFWLC
Proximity Card Readers - Wiegand Output

7] MOUNTING INSTRUCTIONS

Make sure that there are no pieces missing in the mounting kit. Get the right tools according to the
installation type (Drill, screw drivers, metre tape,...) and follow the mounting instructions of the reader.
Ref : DGLPWLC and DGLIWLC
1
Measure and mark the
center lines to determine
the reader position. Drill
the fi xing screw holes
(Diametre: 4MM for the
mounting plate and 6MM
for the reader). Drill the
wiring access area.
Ref : DGLPFNWLC and DGLIFWLC
1
Measure
and
mark
the center lines to de-
termine
the
reader
position. Drill the fi xing
screw holes (Diametre:
4MM for the mounting
plate and 6MM for the
reader). Drill the wiring
access area.
cdvi.com
6
cdvigroup.com
2
DGLIWLC
Insert
the
brass
an-
chors in the mounting
holes, connect the cable
to the terminal block,
then fasten the reader
with the DIAX
screws
®
using the DIAX
span-
®
ner. Make sure that the
varistor is connected on
the lock (refer to page 2
«Recommendations»).
2
DGLIFWLC
Insert
the
brass
an-
chors in the mounting
holes,
connect
the
cable to the connectors,
then fasten the reader
with the DIAX
screws
®
using the DIAX
span-
®
ner. Make sure that the
varistor is connected on
the lock (refer to page 2
«Recommendations»).
3
DGLPWLC
Insert the plastic an-
chors in the mounting
holes,
connect
the
cable to the terminal
block, Then fasten the
reader with the wooden
screws Leave an area
to access the cable to
make the wiring). Put the
covers on top of the reader.
Make sure that the va-
ristor is connected on
the lock (refer to page
2 «Recommendations»).
3
DGLPFNWLC
Insert the plastic an-
chors in the mounting
holes,
connect
the
cable to the terminal
block, then fasten the
reader with the wooden
screws. Put the covers
on top of the reader.
Make
sure
that
the
varistor is connected on
the lock (refer to page 2
«Recommendations»).
EN
4
Optional (MPLATE)
Single gang box moun-
ting
plate
for
the
DGLPFNWLC
mullion
polycarbonate proximity
card reader.

Advertisement

loading

This manual is also suitable for:

DglpfnwlcDgliwlcDglifwlc