Access The Nvr With Its Default Ip Address - Seenergy svr-204 Quick Manual

44 Standalone NVRs & NVD Quick Guide
You should be prompted for the NVR's username and password. Enter
its default username "admin" and password "admin" and then
click "OK" to enter the system

Access the NVR with its default IP address

The NVR comes with a pre-configured static IP "192.168.101.50".
However, it is only used when there is no DHCP server presented in
the network. The NVR will turn on its DHCP server function and act as
the DHCP server in the network. To connect to the NVR, use a PC that
is on the same network over a switch or hub, or connect the PC
directly to the NVR using a crossover CAT5 Ethernet cable.