Connect To The Nvr - Seenergy SVR-504 User Manual

SVR-500 Series
Network Video Recorder

Connect to the NVR

There are various ways you can connect to the NVR and below are
the suggested methods for different network setup:
• The NVR is placed in a network with a DHCP server: Connect to
the NVR by using "SEEnergy Device Search" Utility
• The NVR is placed in a network without DHCP server (or you are
connecting to it directly): Access NVR with its default IP
Use SEEnergy Device Search Utility
When the NVR is on a corporate network, or a local area network
where a DHCP server is already present. Run the "SEEnergy Device
Search" utility from a computer which is also on the same network
and locate the NVR via its IP address assigned by the top-level DHCP
server.
To begin, launch the "SEEnergy Device Search" utility from the CD
and proceed with the installation:
14