Section 3 - Configuration
This section allows you to change the administrator's password and configure the server settings for your camera. You can also
manage the user account(s) that are allowed to access to your camera.
Admin
To change the admin password used to log into the web
Password:
interface, enter the old password, then enter a new password
and retype it in the next box. Click Apply.
Camera Name:
Enter a name for your camera. This is useful if you have
multiple cameras on your network.
LED Control:
Select Normal to enable the LEDs on the front of the device,
or select Off to disable the LED. Disabling the LED function
may be useful if you want to make the camera less obvious.
User Access
Select Enable to enable user access control or Disable to
Control:
allow only the administrator account to access the camera. If
enabled, you can create users below under Add User Account.
Snapshot
Select Enable to allow access to the current camera snapshot
URL
via the web address indicated.
Authentication:
OSD Time:
Select Enable to allow the current time to be added to the
camera video, and select a color to use for the text.
D-Link DCS-5030L User Manual
Maintenance
Admin
44
44