Secure the faceplate.
5.
the SMD2000-24T faceplate with the two flathead screws included in your UIM
packaging.
Replace the chassis cover.
6.
original eight flathead screws as depicted in
Tabletop Installation
Procedure
To install the SMD2000-24T on a table, desk, shelf, or remote cabinet:
1. Affix the four provided rubber pads to the bottom of the chassis for surface grip.
Bottom of Chassis
2. Place the SMD2000-24T such that the cables will not become a tripping hazard or
pull loose from the chassis. Ensure that the air supply vents on the sides of the
chassis are not blocked.
Using a Phillips screwdriver, secure the UIM faceplate to
Replace the chassis cover and secure with the
7
Step 1
on page 5.