Default Settings - Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T Installation Instructions Manual

Default Settings

SHDSL Parameter Defaults
Table 1. SHDSL Defaults
Parameter
Backbone-VLAN
Circuit Identification
Flood
IP Range 1
IP Range 2
Protocol
Speed
VLAN Priority
VLAN Range
T1 Uplink Parameter Defaults
Table 2. T1 Defaults
Parameter
Frame Type
Line Attenuation
Line Code
Speed*
Timing*
* Speed and timing are non-configurable parameters for the SMD2000-24T T1
uplink ports.
Default
0 (off)
n/a (no default)
Uplink
0.0.0.0 – 255.255.255.255
0.0.0.0 – 0.0.0.0
All
272 kbps
0 (none)
0 - 0 (off)
Default
Extended Super Frame (ESF)
0 dB
Bipolar with 8 Zero Substitution (B8ZS)
n/a (T1 uplink speed is determined via communication with the
remote T1 provider equipment to which the SMD2000-24T is
connected)
Loop
15