Table of Contents
Advertisement
Table 9. LEDs (2 of 3)
State
LNK
Flashing
(10/100
green
Ethernet
Manage-
Solid green
ment
Link)
Flashing
amber
Solid
amber
No
illumination
LK: T1
Flashing
Uplink
green
Port 1
and 2
Solid green
No
illumination
Indication
100 Mbps management
connection is established
and active
100 Mbps management
connection is established
10 Mbps management
connection is established
and active
10 Mbps management
connection is established
No management connection
T1 uplink connection is
established and active
T1 uplink connection is
established
Red Alarm: The T1 uplink's
incoming connection has
been lost; no data is being
received.
21
Additional Information
Traffic is flowing at 100
Mbps.
No current traffic flow.
Traffic is flowing at 10 Mbps.
No current traffic flow.
NOTE: The LNK LED
pertains only to direct
connections between the
SMD2000-24T and your PC;
it does not pertain to remote
network access of the
SMD2000-24T.
The uplink port has received
valid data from the remote
T1 provider equipment
within the last second.
A T1 uplink connection
exists and the port may be
transmitting but it has not
received any data from the
remote T1 provider
equipment within the last
second.
If the T1 uplink's outgoing
connection has also been
lost then the remote T1
provider equipment is in Red
Alarm as well.
Advertisement
Table of Contents
