Led Indicators - Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T Installation Instructions Manual

Command Line Interface for 4000E and 12000E BACs, Micro DSLAMs, and
Network Extenders User's Guide (Document Number CLI-A2-GB20) or the Network
Management System User's Guide (Document Number NMS-A2-GB20) for further
information.

LED Indicators

For purposes of the following descriptions, a pulsing LED blinks steadily at a rate of
once per second. A flashing LED blinks at a more rapid, less constant rate.
Table 9. LEDs (1 of 3)
State
PWR Solid green
(power)
Solid
amber
No
illumination
FAN Solid green
Solid
amber
No
illumination
Indication
SMD2000-24T is receiving
power
SMD2000-24T is receiving
power
No power
All four fans are fully
functional
Fan failure
Total fan failure
20
Additional Information
Both power terminals are
connected.
One of the two power
terminals is connected.
If the SMD2000-24T is not
receiving power, none of the
LEDs will be illuminated.
At least one of the four
chassis fans is not
functioning properly.
None of the four chassis
fans is functioning properly.