Table of Contents
Advertisement
Product-Related Documents
To install a phone filter, refer to the appropriate document:
Document Number Document Title
6035-A2-GN11
6040-A2-GN11
Contact your sales or service representative to order additional product documentation.
Paradyne documents are available on the World Wide Web at www.paradyne.com.
Select Library
Installing the Hotwire 6310 MVL Modem
Place the Hotwire 6310 MVL Modem on a flat surface with clearance for the rear
connectors.
"
Procedure
1. If a telephone is installed, unplug the telephone line from the RJ11 wall jack.
2. Use the supplied RJ11 6-pin interface cable for the MVL LINE connection. Insert
one end of the cable into the jack labeled LINE. Insert the other end of the cable
into the RJ11 wall jack.
MVL Modem
RJ11
Wall Jack
Hotwire 6035 MVL Phone Filter Installation Instructions
Hotwire 6040 MVL Wall Jack Phone Filter Installation
Instructions
Technical Manual
Hotwire DSL & MVL Systems.
98-15895
4
Advertisement
Table of Contents
