Table of Contents
Advertisement
H
Use an Ethernet crossover cable and connect the other end to a PC with an
Ethernet Network Interface Card (NIC) installed.
PC with Ethernet
Network Interface
Card
For MVL modem cable pin assignments, refer to Cables & Connectors on page 10.
5. Insert the supplied power cord's round end into the jack labeled POWER. Attach
the supplied ferrite choke as closely as possible to the MVL modem. Pass the
cable through the ferrite choke twice, creating a loop as shown. Close the two
halves around the ferrite choke and snap the ferrite choke shut. Plug the
transformer into an ac outlet.
Ferrite
Choke
Power
Jack
MVL Modem
Ethernet
MVL Modem
or
Ethernet
Line
Cable
00-16352-01
6
98-15907
Advertisement
Table of Contents
