Table of Contents
Advertisement
2. From the list of apps press OK on your remote control to check the box for the apps you want to add to the App Shortcuts section, or press
OK on your remote control un-check the box for the apps you want to remove from the App Shortcuts section.
3. Press
to confirm your selections and return to the BenQ Launcher main page.
Deleting an app from the All Apps page
To delete an app from the All Apps page:
1. Press
/ / /
on your remote control to select the App you want to delete and then press and hold OK for a few seconds.
2. Confirm that you want to delete the app from the All Apps page.
Changing network settings
The BenQ Launcher allows you to change your wireless connection settings via the WLAN Settings menu within the Internet menu, which can
be accessed by selecting the Settings menu from the System section in the main menu.
To change or connect to the Internet via Wireless LAN:
1. Ensure WLAN is enabled in the WLAN field.
2. Press
/
on your remote control to select the desired SSID for the Wireless AP you want to connect to and press OK.
3. When connecting to an SSID:
•
If you chose a secured SSID for the first time, a window appears to prompt you to enter the appropriate password. Press
remote control to select the corresponding keys on the virtual keypad to enter your password. After you have entered the password, select
Connect and press OK to connect.
The password will be stored in the projector's memory. In the future, if you select the same SSID again, you will not be prompted to enter a password unless you delete the
SSID from the projector's memory.
Inputting text
Various menus within the BenQ Launcher may require that you input text. To input text in a text field:
1. Select the text field where you want to input text.
2. Press OK on your remote control, a full alphanumeric keyboard will appear on screen.
55
/ / /
on your
Advertisement
Table of Contents
