Ending A Bluetooth Connection; Deactivating The Bluetooth Speaker Or Headphones - BenQ GSI Outdoor Leisure Series User Manual

Digital portable led projector

Table of Contents

6. Select the speaker or headphones from the list of Bluetooth devices in the Bluetooth setting menu.

If you are unable to find the speaker or headphones from the list of Bluetooth devices on the first try, ensure that pairing mode is activated on the device, then select Scan

for devices in the Bluetooth setting menu to restart the scanning process.

7. When the projector and speaker or headphones have successfully connected the device listing in the Bluetooth setting menu will be labeled

Connected, you can now output the audio from the projector to the speaker or headphone.

Once you have successfully paired your mobile device with the Bluetooth speaker, pairing information will be stored on both devices and a connection

will automatically be made when Bluetooth is enabled on both devices and both devices are within range of each other.

Ending a Bluetooth connection

In cases where you want to disconnect a speaker or headphones from the projector and connect to another speaker or headphones follow the steps

below:

1. Press

on the projector or your remote control to display the source selection bar.

2. Select Bluetooth in the source list, the Bluetooth setting menu will launch.

3. Select the already connected speaker or headphones from the list of Bluetooth devices in the Bluetooth setting menu and press OK.

4. Confirm that you want to disconnect the speaker or headphones from the projector.

5. Activate Bluetooth-pairing mode on the new speaker or headphones.

6. Select the new speaker or headphones from the list of Bluetooth devices in the Bluetooth setting menu.

If you are unable to find the speaker or headphones from the list of Bluetooth devices on the first try, ensure that pairing mode is activated on the device, then select Scan

for devices in the Bluetooth setting menu to restart the scanning process.