Fastener Identification - Dodge Dakota Sport 2001 Service Manual

AN
INTERNATIONAL SYMBOLS (Continued)
1 High Beam
2 Fog Lamps
3 Headlamp, Parking Lamps, Panel Lamps
4 Turn Warning
5 Hazard Warning
6 Windshield Washer
7 Windshield Wiper
8 Windshield Wiper and Washer
9 Windscreen Demisting and Defrosting
10 Ventilating Fan
11 Rear Window Defogger
12 Rear Window Wiper

FASTENER IDENTIFICATION

GRADE/CLASS IDENTIFICATION
DESCRIPTION
The SAE bolt strength grades range from grade 2
to grade 8. The higher the grade number, the greater
the bolt strength. Identification is determined by the
line marks on the top of each bolt head. The actual
bolt strength grade corresponds to the number of line
marks plus 2. The most commonly used metric bolt
strength classes are 9.8 and 10.9. The metric
strength class identification number is imprinted on
the head of the bolt. The higher the class number,
the greater the bolt strength. Some metric nuts are
imprinted with a single-digit strength class on the
nut face. Refer to the Fastener Identification (Fig. 7)
and Fastener Strength Charts (Fig. 8).
Fig. 6 INTERNATIONAL SYMBOLS
13
14
15
16
17
18
19
20
21
22
23
24
FASTENER USAGE
DESCRIPTION
WARNING: USE OF AN INCORRECT FASTENER
MAY RESULT IN COMPONENT DAMAGE OR PER-
SONAL INJURY.
Figure art, specifications and tightening torque ref-
erences in this manual are identified in metric and
SAE format.
During any maintenance or repair procedures, it is
important to salvage all fasteners (nuts, bolts, etc.)
for reassembly. If the fastener is not salvageable, a
fastener of equivalent specification must be use.
DESCRIPTION
Most stripped threaded holes can be repaired using
a Helicoil . Follow the manufacture recommendation
for application and repair procedures.
Rear Window Washer
Fuel
Engine Coolant Temperature
Battery Charging Condition
Engine Oil
Seat Belt
Brake Failure
Parking Brake
Front Hood
Rear hood (Decklid)
Horn
Lighter
INTRODUCTION 5