MerCruiser 305 CID (5.0L) Service Manual page 835

VELVET DRIVE 5000 SERIES TRANMISSION
Changing Transmission Fluid
Draining Transmission
1. Clean area around drain plug shown.
2. Remove dipstick and then remove drain plug. Drain oil from transmission into a suitable
container.
3. Check oil for the following foreign matter:
•
Metal Particles - A few small particles are normal. Larger metal chips are an early sign
of transmission failure which may mean transmission should be disassembled and in-
spected for internal damage.
•
Rubber Particles - Indication of cooler hose wear. Hoses should be inspected for
cracks or fraying. Replace damaged hoses.
4. Coat drain plug threads with Quicksilver Perfect Seal. Install and torque drain plug to
25 lb-ft (34 Nm).
5. Reconnect hose and tighten securely.
6. Refill transmission with specified fluid. Refer to "Filling Transmission."
Index
Page 8B-18
a - Drain Plug
a
SERVICE MANUAL NUMBER 24
73252
90-861327--1 OCTOBER 1999