SERVICE MANUAL NUMBER 24
Knock Sensor (KS) Module (MEFI 1 and MEFI 2 Only)
Refer to "Service Precautions," at front of this section BEFORE proceeding.
REMOVAL
1. Remove Knock Sensor from electrical bracket.
MEFI 1 Shown
2. Disconnect electrical connector at Knock Sensor (KS) Module.
CLEANING AND INSPECTION
1. Clean the external surfaces of the KS module with a dry cloth.
2. Inspect surfaces of KS module for evidence of damage.
Index
90-861327--1 OCTOBER 1999
a
a -
Electrical Bracket
b -
Knock Sensor (KS) Sensor
FUEL INJECTION DISASSEMBLY AND REASSEMBLY
NOTICE
b
72801
Page 5E-61