MerCruiser 305 CID (5.0L) Service Manual page 448

SERVICE MANUAL NUMBER 24
b. Connect the fuel line to the fuel rail fitting at location shown. Tighten securely.
Typical
5. On Black Scorpion: Install the cooler-to-fuel rail line as follows:
a. Route the fuel line to the back side of engine.
b. Connect the fuel line to the fuel rail fitting at location shown. Tighten securely.
6. On Throttle Body EFI: Install the cooler-to-throttle body fuel line as follows:
a. Route the fuel line to the back side of engine.
b. Connect the fuel line to the throttle body fitting at location shown. Tighten securely.
7. Install distributor cap (if removed).
8. Connect vacuum line to fuel pressure regulator.
9. Attach engine harness electrical connector to fuel pump harness connector.
Index
90-861327--1 OCTOBER 1999
a - Fuel Line, Fuel Cooler-to-Fuel Rail
b - Fuel Rail Fitting
a - Fuel Line, Fuel Cooler-to-Fuel Rail
b - Fuel Rail Fitting
a - Fuel Line, Fuel Cooler-to-Fuel Rail
b - Fuel Fitting
FUEL DELIVERY SYSTEM FOR ELECTRONIC FUEL INJECTION
b
a
a
75716
b
a
75696
b
Page 5C-15
75806