Fabric/Temperature Control - Kenmore 90 Series Gas Owner's Manual And Installation Instructions

FABRIC/TEMPERATURE CONTROL
Proper use of this control helps
ensure that fabrics are dried at the
right temperature for maximum life,.
Use this control to select the drying
temperature that matches the fabrics
in your load.
• Select LOW for delicate fabrics. Select
HIGH for durable fabrics such as sturdy
work clothes or bath towels.
• The FABRiC/Temperature Control
will not work when the Cycle Selector
Control (lqmer) is in the AIR DRY Cycle.
FABRIC
TEMPERATURE
F KNIT
I_mUM NORMAL
DELICATE PERM PRESS
LOW MEDIUM / H_ H
AIR FLUFF •
I_o H_AT
COTTON
The following chart lists suggested
dryer settings and drying times for
various loads. This is only a guide.
Settings may require adjustment
depending on the requirements of
your load.
Type of Load
COTTONS AND LINENS
AUTO DRY [ Drying 1. TIMED DRY
Setting Temp Setting
Extra Heavy - Bedspreads, mattress
pads, quilts
Heavyweight - Towels, jeans, corduroys,
work clothes
Mediumweight - Sheets, cotton underwear,
diapers
Lightweight- Batistes, organdies, lingerie
MORE DRY
MORE DRY
NORMAL
DRY
NORMAL DRY
PRESS, SYNTHETICS AND BLENDS
HIGH
HIGH
MEDIUM/HIGH
or MEDIUM*
LOW
70-80 min.
50-60 min.
40-50 rain.
30-40 rain.
PERMANENT
Heavyweight - Work clothes, jackets, NORMAL
HIGH 40-50 min.
raincoats DRY
Mediumweight - Shirts, play clothes, NORMAL MEDIUM/HIGH
30-40 min.
sheets, slacks DRY or MEDIUM*
Lightweight- Lingerie, blouses, dresses LESS DRY 1_4EDIUM or LOW* 20-30 rain.
KNITS
Heavyweight-Cottons, rayons, blends, NORMAL
HIGH 40-50 min.
T-shirts, slacks, shirts DRY
Mediumweight- Synthetics (polyester, NORMAL i MEDIUM/HIGH
acrylic, etc.), dress slacks, skirts, sweaters DRY i or MEDIUM* 30-40 min.
Lightweight- Synthetics (polyester, acrylic, LESS DRY I LOW 20-30 rain. etc.) and blends, lingerie, blouses, dresses
*Use the lowest temperature setting available on your dryer.
24