Using Wrinkle Guard; Lint Alert - Kenmore 90 Series Gas Owner's Manual And Installation Instructions

USING WRINKLE GUARD LINT ALERT
WRINKLE GUARD helps keep your
permanent press items wrinkle free
when you don't unload the dryer
promptly at the end of the AUTO DRY
Cycle.
If you do not open the door at the end
of the AUTO DRY Cycle, WRINKLE
GUARD will tumble the clothes without
heat for about 15 seconds periodically
throughout the cycle.
• On dryers with WRINKLE GUARD II,
periodic tumbling will continue for
about 40 minutes unless you open the
dryer door.
• On dryers with WRINKLE GUARD Ill,
periodic tumbling will continue for
about 21/2hours unless you open the
dryer door.
• WRINKLE GUARD III has a select-
able ON/OFF Option. When WRINKLE
GUARD III is set at OFF, the dryer
stops after COOL DOWN and may be
unloaded.
The End-of-Cycle SIGNAL will sound
after each period of tumbling, unless it
is off.
A properly cleaned lint screen will
allow your dryer to operate at peak
efficiency'. This can reduce your utility
bills and e_tend the life of your dryer.
Clean the lint screen before each load.
If you do not, your dryer may not operate
properly. (:)n some models, a continuous
whistle (lint alert) will sound if too much
lint is allowed to accumulate on the lint
screen. Whe,n this happens, remove the
lint screen, clean, and replace. When
the dryer is restarted, the sound will stop.
WRINKLE GUARD
Ul
OFF ON
27