Heated Dry Rack - Kenmore 90 Series Gas Owner's Manual And Installation Instructions

HEATED DRY RACK
The dry rack was shipped on top
of your dryer. Remove and discard
shipping blocks before using.
Use the heated drying rack to
machine dry items you would not
necessarily want to tumble dry.
The dry rack gives you concentrated
heat for efficient and uniform drying.
It also reduces noise when drying
items that have buckles.
To Use the Heated Dry Rack:
Do not remove lint screen.
STEP 1. Open dryer door.
STEP 2. Slide Dry Rack over the bottom
of the dryer door opening. Push down to
secure it on the frame.
STEP 3. Place wet items on top of the
dry rack. Allow space around items for
air to circ4Jlate. The rack does not move,
but the drum will rotate. Make sure items
do not hang over the edges or between
rack grill.
STEP 4. Close dryer door.
STEP 5. Use the TIMED DRY or AIR
DRY Cycle. Refer to the chart below.
STEP 6. ,Set the FABRICfTemperature
Control if available. Refer to the chart
below.
STEP 7. ,Start the dryer.
To remow the dry rack, lift it straight up
and out of the dryer.
FABRIC/ Cycle Selector
Suggested Items Temperature (Timer)
for Rack Drying Setting Setting Minutes*
1. Washable wool items (block to
DELICATE TIMED DRY 20
shape and lay flat on rack)
2. Stuffed toys (cotton or polyester COTTON TIMED DRY 20
fiber filling)
3. Stuffed toys (foam rubber filling) AIR FLUFF - or- AIR DRY 50
4. Galoshes (rubber) AIR FLUFF - or- AIR DRY 20
5. Foam rubber pillows AIR FLUFF - or- AIR DRY 50
*Reset time, as needed, to complete drying.
28