Table of Contents
Advertisement
3/8 X 3-3/4" 57
FIGURE 5
STEP 5:
• Swing the GUIDE RODS (18) into the guide rod bushings in each of the RIGHT and LEFT BOOM PLATES (14 & 15) as shown in
FIGURE 5.
• LOOSELY assemble the RIGHT and LEFT BOOM PLATES (14 & 15) to the UPRIGHT (2) using three 3/8 X 3-3/4" BOLTS (57) and
three 3/8" LOCK NUTS (63). See FIGURE 5.
• Slide the SHAFT COLLARS (36) to the top of the GUIDE RODS (18) and tighten set screws as shown in FIGURE 5.
FIGURE 6
STEP 6:
•
LOOSELY assemble the RIGHT and LEFT ARM SUPPORTS (4 & 5) to the BASE (1) using four 3/8 X 3-3/4" BOLTS (57), four
3/8" FLAT WASHERS (64), and four 3/8" LOCK NUTS (63). See FIGURE 6.
• Apply WEIGHT STACK LABELS (25) to the WEIGHT PLATES (21) starting on the HEAD PLATE as shown in FIGURE 6.
14
2
25
9
36
TIGHTEN!
15
18
63
4
3/8 X 3-3/4" 57
5
63
1
64
Hide quick links:
Advertisement
Table of Contents
