Sanyo DC-F450 Instruction Manual page 12

BEFORE RECORDING AND DUBBING
iii
Recording copyright material without permission of the copyright
owners is usually an infringement. If you wish to re-record
copyright material, permission from the copyright owner is
necessary. SANYO does not approve of, and cannot be held
responsible for, any unlawful use of this machine.
Use deck B for recording.
1.
2.
Press the cassette holder (EJECT portion) to open it and load the
cassette for recording.
Set the DOLBY NR button to ON or OFF as desired.
Dolby NR ON "
DU
B NW appears
Dolby NR OFF ..........." DU B NR" disappears
Automatic record muting
Undesirable parts of a programme can be omitted while recording.
Press the REC MUTE button on the remote control once while recording.
The REC PAUSE indicator blinks and a 5-second unrecorded blank space
is created, then the cassette deck enters the record pause mode. The REC
PAUSE indicator lights and" " blinks on the display.
To add another 5-second blank space, press the REC MUTE button
again,
- To resume recording, press the button.
Note:
The record muting function does not operate during CD computer recording
or tape high-speed dubbing.
Accidental erasure prevention tabs (for protecting
valuable recordings)
Accidental erasure can be prevented by breaking out the tabs on the end
of the cassette tape (where the tape is not exposed) using a screwdriver
or similar implement.
If a tab is broken out in error and you wish to re-record the tape, simply
block the tab hole using adhesive tape and the tape can be used for
recording again.
For Cr02/Metal tape
Break out tab A for side A.
Break out tab B for side B.
COMPACT DISCS
RECORDING
6. After deck B stops automatically, turn over the cassette and reinseri
it,
Computer recording
If the tape ends while a track is still playing, the CD player enters
With computer recording, you can record a CD onto a cassette by pressing
the pause mode at the beginning of the track that was playing.
just one button.
This track will be recorded at the beginning of side B.
1. Load the disc(s) to be recorded.
7. Press the COMPUTER REC button. Recording of side B starts
2. Load a blank cassette into deck B.
automatically.
3. Select "CD.
For programmed recording from up to 3 discs, programme the
When the end of the tape (side B) is reached, the CD player and deck
material in advance (as described under''PROGRAMMED PLAY").
B stop automatically.
4. Press the disc select button (DISC 1, DISC 2 or DISC 3) to select the
If the last track on the CD plays completely before the end of the
disc to be recorded, then press the STOP button.
tape, disc play stops automatically. Deck B also stops.
For programmed recording, this step is unnecessary.
5, Press the COMPUTER REC button.
The system automatically performs the following functions:
Note:
Recording starts automatically after 8 seconds, so the recording will
not be interrupted by the leader tape at the beginning of sides A and
Deck B:
B.
- The tape rewinds to the beginning.
- A 5-second blank space is automatically recorded at the end of each
Recording starts.
track.
CD player:
To stop computer recording at anytime, press the STOP button on the
The player searches for the first track to be recorded, then enters
CD player or the button on the deck. The CD player and deck B will
,..-..
the pause mode.
- CD play starts.
Manual edit recording
Recording starts without rewinding the tape initially.
Press the EDIT button to turn the '(MANUAL indication on
before proceeding to step 5.
To cancel this mode, press the button again. "MANUAL"
disappears.
- After loading the cassette, the tape must be wound to the
point where you would like to start recording.
>LU~,
When CD computer recording is used, repeat play mode is canceled
automatically.
Manual recording
1,
2.
3.
The DECK B and REC PAUSE indicators light, "COMPU. REC and
"A appear on the display as recording begins.
4,
g J 0.01
-
DW
34
5678
z)
'3
~COMPV ~EC[
Follow the steps 1'- 3 under "Computer recording" above.
If required, press the disc select button (DISC 1, DISC 2 or DISC
3) to select the disc, then press the STOP button. Select the track
number to be recorded.
Press the REC PAUSE button. Deck B enters the record pause mode.
The REC PAUSE and DECK B indicators light. " " blinks on the
display.
Press the button. "F" lights and recording starts.
To stop recording, press the or STOP button.
When the end of the tape is reached, the CD player and deck B stop
automatically.
If the last track on the CD plays completely before the end of the
tape, disc play stops automatically. Deck B also stops.
11