How To Use Remote Control - Luxman L-505uX Owner's Manual

How to Use Remote Control

Remote control (RA-17)
1. Operation switch (OPERATION)
Toggles the power on and off.
When wiring or connection is performed, be sure to
turn off this switch.
. Input selector
(LINE-1, LINE-, LINE-3, LINE-4, BAL-1,
BAL-2, PHONO, MONITOR)
Selects an input terminal from among the unbalanced
input terminals on the rear panel consisting of
LINE-1, LINE-, LINE-3, LINE-4, PHONO, and
MONITOR or the balanced input terminal consisting
of BAL LINE.
* The balanced input terminal (BAL LINE) can be
selected by pressing either of BAL-1 or BAL-.
3. Monaural switch (MONO)
This switch is not operated in L-505uX.
16
1
2
3
4
5
6
7
8
9
10
11
4. Separate switch (SEPARATE)
Separates the pre-amplifier and main-amplifier each other.
off: Uses this unit as a normal pre-main
amplifier.
(separate
indicator off)
on: Feeds external signals from the MAIN
(separate IN terminal on the rear panel to the
indicator on)
main-amplifier section.
• Holding down this switch for 1 second toggles the
separate switch on and off.
The separate indicator lights up when the separate
switch is on.
5. Mute switch (MUTE)
Activates the mute function and blinks the power-on
indicator resulting in no sound generated.
Pressing this button again to set the mute function to
off allows sound to be generated.
6. Meter switch (METER)
Turns off the meter lights.
Pressing this switch again turns on the meter lights again.