NETGEAR DM200 User Manual page 36

Broadband High-Speed DSL Modem Model DM200
Field
Multiplexing Method
VPI
VCI
Use VLANID
Priority (0 ~ 7)
Bridge Mode
(IPTV virtual interface only and
for some ISPs only)
Internet Service Provider
Login
Password
Description
Select LLC-BASED or VC-BASED, as indicated by your ISP.
The multiplexing method can either be virtual circuit (VC) based or logical link control
(LLC) based.
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting, which depends
on the selected ISP. The VPI might be required not only for a VC-based connection but
also for an LLC-based connection.
Enter a number between 32 and 65535 for the virtual circuit number for the virtual channel
identifier (VCI), as indicated by your ISP.
If your ISP did not provide you with a VCI setting, leave the default setting, which depends
on the selected ISP. The VCI might be required not only for a VC-based connection but
also for an LLC-based connection.
Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP.
A VLAN ID might be required if you subscribe to both Internet service and a service such
as IPTV. If your ISP did not provide you with a VLAN ID, leave the Use VLANID check
box cleared, which is the default setting.
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did not
provide you with a priority value, leave the default setting, which depends on the selected
ISP.
If your ISP does not support bridge mode for an IPTV virtual interface, the check box
does not display onscreen.
If you are specifying the settings for the IPTV virtual interface and your ISP informed you
that you must use bridge mode, select the Bridge Mode check box.
Some devices, such as an IPTV, cannot function behind the modem's Network Address
Translation (NAT) service or firewall. Based on what your ISP requires (some ISPs
support an IPTV virtual interface but do not require bridge mode), you can enable the
bridge between the device and the modem's IPTV virtual interface so that the device
can connect directly to the ISP's network.
Select the encapsulation, as indicated by your ISP:
• PPPoA. Your Internet connection uses PPP over ATM.
• PPPoE. Your Internet connection uses PPP over Ethernet.
Enter the login name that you use to log in to your Internet service, as indicated by your
ISP.
This login name is often an email address.
Enter the password that you use to log in to your Internet service, as indicated by your
ISP.
Manage the Internet Settings Manually
36