Factory Settings - NETGEAR DM200 User Manual

Factory Settings

You can reset the modem to the factory default settings, which are shown in the following table.
For more information about resetting the modem to its factory settings, see
Default Settings on page 76.
Table 3. DM200 modem factory default settings
Feature
Router login
User login URL
User name (case-sensitive)
Login password
(case-sensitive)
Device mode
Internet connection
WAN MAC address
WAN MTU size
Port speed
Local network (LAN)
LAN IP address
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
Broadband High-Speed DSL Modem Model DM200
Default Setting
www.routerlogin.net (or www.routerlogin.com or 192.168.5.1)
admin
password
Router (Modem + Router)
For more information, see Disable the Modem's Routing Features and Use the
Modem as a DSL Modem Only
Use default hardware address
Determined by the protocol that is used for the Internet connection
For more information, see Manage the MTU Size
Autosensing
192.168.5.1
255.255.255.0
Enabled
192.168.5.2 to 192.168.5.254
192.168.5.2
192.168.5.254
Supplemental Information
Return the Modem to Its Factory
on page 69.
on page 52.
105