Download Print this page

THERMOROSSI ecotherm 3001 Installation, Use And Maintenance Manual page 11

Hide thumbs Also See for ecotherm 3001:

Advertisement

5.7 D
5.7 D
5.7 D
5.7 DA A A A A T T T T T A A A A A A N
5.7 D
A N
A N
A NA L
A N
A L
A L
A L
A LY Y Y Y Y SIS
SIS
SIS
SIS
SIS
DATA ANALYSIS represents the function concerning update of data between the heater and the Aladino radio control. The radio wave
transmission is frequently used by numerous applications: the DATA ANALYSIS function is used to update the temperature, ventilation,
power, temperature analysis, system status. The DATA ANALYSIS process can take from a minimum of 18 seconds to a maximum of 40
seconds. If the DATA ANALYSIS is not executed successfully, repeat the operation by pressing the button (19) for a few seconds then
releasing it.
5.8 TRANSMISSION - RECEPTION ALARMS
5.8 TRANSMISSION - RECEPTION ALARMS
5.8 TRANSMISSION - RECEPTION ALARMS
5.8 TRANSMISSION - RECEPTION ALARMS
5.8 TRANSMISSION - RECEPTION ALARMS
If a problem arises with the communication between the handheld radio control and the heater the following messages could appear on the
display:
OUT OF RANGE
NO CURRENT
PRESS A BUTTON
5.9
5.9
5.9
5.9
5.9
A A A A A UT
UT
UT
UTOMA
UT
OMA
OMA
OMA
OMATIC / MANU
TIC / MANU
TIC / MANU
TIC / MANU
TIC / MANUAL HEA
5.9.1
5.9.1
5.9.1
5.9.1
5.9.1
DESCRIPTION OF
DESCRIPTION OF
DESCRIPTION OF THE
DESCRIPTION OF
DESCRIPTION OF
In the automatic operating cycle the heater expresses its maximum flexibility of
operation while optimising fuel consumption. During the AUTO cycle the heater self-
regulates the combustion and ventilation according to the temperature (9) set by means
of buttons (3) and (4). If for example the temperature (9) is set at 23°C the heater
attempts to take the room temperature (5) detected by the handheld radio control to
23°C in the
shortest possible time by modulating power and ventilation as the room temperature
approaches set temperature (9). Once this temperature is reached the heater settles
at the minimum operating value for combustion and ventilation. To select this function
press the button (1) repeatedly until the word AUTO appears on the display (see image
on the right). During the POWER ON phase, that takes 20 minutes, the heater ignores all
the commands transmitted. After this time has elapsed the word POWER ON
disappears on the delay and the word RUNNING appears : during this phase the
AUTOMATIC cycle is operational. The room fan starts operating as soon as the heater
body exceeds the 42°C threshold.
It is normal for the temperature sensor to detect temperatures which are
slightly different to the real ones: variations caused by the environment in
which the radio control is positioned.
5.9.2
5.9.2
5.9.2
5.9.2
5.9.2
DESCRIPTION OF
DESCRIPTION OF
DESCRIPTION OF
DESCRIPTION OF
DESCRIPTION OF THE MANU
The manual cycle is indicated by the absence of the word AUTO on the display. The
combustion and ventilation power can be controlled independently from each other by
means of the buttons (1) and (2). During the POWER ON phase, that takes 20 minutes, the
heater ignores all the commands transmitted to it. After this time has elapsed the word
POWER ON disappears on the delay and the word RUNNING appears : during this phase
the MANUAL cycle is operational. The room fan starts operating as soon as the heater
body exceeds the 42°C threshold. The combustion is regulated by 5 bars, the regulation of
the ventilation is distributed on 6 steps. The room temperature thermostat is disabled when
this function is operational.
: the radio control is located at a distance that is greater than the radio control's radius of action.
: the heater has shut down and does not appear to be powered by electricity.
: if the radius of action has been exceeded, to restore communication with the heater press one of the
buttons on the radio control for approx. 2 seconds.
AL HEA
AL HEA
AL HEATER OPERA
AL HEA
TER OPERA
TER OPERA
TER OPERA
TER OPERATING MODE
THE A A A A A UT
THE
THE
THE
UT
UT
UTOMA
UT
OMA
OMATIC OPERA
OMA
OMA
TIC OPERATING MODE CY
TIC OPERA
TIC OPERA
TIC OPERA
THE MANU
THE MANU
THE MANU
THE MANUAL OPERA
AL OPERATING MODE CY
AL OPERA
AL OPERA
AL OPERA
TING MODE
TING MODE
TING MODE
TING MODE
TING MODE CYCLE
TING MODE CY
TING MODE CY
TING MODE CY
CLE
CLE
CLE
CLE
TING MODE CY
TING MODE CY
TING MODE CYCLE.
TING MODE CY
CLE.
CLE.
CLE.
CLE.
AVVIO
AVVIO
pg. 11

Advertisement

loading