Weslo 831.215000 User Manual page 7

8. Orient the Seat Bushing (8) so that the indicated hole in
the Seat Bushing is aligned with the indicated hole in
the Frame (1), and press the Seat Bushing into the
Frame. Attach the Seat Bushing with two M4 x 5mm
Screws (14).
Insert the Seat Post (5) into the Frame (1), and align
one of the adjustment holes in the Seat Post with the
hole in the Frame. Next, insert the Seat Knob (9) into
the Frame and the Seat Post, and turn the Seat Knob
clockwise until it is tight. Make sure that the Seat
Knob is inserted through one of the adjustment
holes in the Seat Post.
9. Identify the Left Pedal (24), which is marked with an
"L." Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the left arm of the
Crank (21). Tighten the Right Pedal (not shown) clock-
wise into the right arm of the Crank. Important:
Tighten both Pedals as firmly as possible. After
using the exercise cycle for one week, retighten the
Pedals. For best performance, the Pedals must be
kept tightened.
Adjust the Left Pedal Strap (53) to the desired position,
and press the end of the Left Pedal Strap onto the tab
on the Left Pedal (24). Adjust the Right Pedal Strap
(not shown) in the same way.
10. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
8
9
53
24
Tab
7
5 Adjustment
Holes
8
Hole
14
1
14
Hole
9
21